SOTA Instruments Water Ozonator WOZ5
What the Water O3zonator Does: We can all benefit from more oxygen. Oxygen makes us feel more alert. As a result of environmental pollution, there is less oxygen in our air and water today. Ozone, freshly added to drinking water, provides a safe and gentle increase in oxygen.
The Water Ozonator can also be used to sterilize water. As nature’s cleanser, ozone purifies our air, soil and water. Ozone has become a well-known source for sterilizing water systems and bottled water. Laboratory testing using a SOTA unit to sterilize water, proved several virulent pathogens were killed. The Water Ozonator can be a handy item when traveling or camping as it can be operated from a 12-Volt battery.
Features: The Water Ozonator uses an advanced Corona Discharge method to produce ozone. There are two common methods to generate ozone: a) Corona Discharge and b) Ultraviolet Light (UV). The Corona Discharge method produces a more consistent and higher output of ozone compared to the UV light method. Unless the UV light unit is large enough, it is difficult to ozonate water to the required concentrations. The UV method is not as reliable because the UV bulb deteriorates over time. Although, if using very high-powered (>500mg/Hr) methods of generating ozone, ultraviolet is best, as it does not produce oxides of nitrogen (NOx). The SOTA Water Ozonator is not considered a very high-powered unit, therefore it does not produce oxides of nitrogen under normal operating conditions. This was confirmed with laboratory testing by Maxxam Analytics Inc in Edmonton, Alberta, Canada.
- The Ozone Chamber is made of Fused Quartz Crystal and High Grade Stainless-Steel. Under normal use, the ozone chamber should last several years.
- Ozone resistant materials have been used. The tubing is silicone which is an ozone resistant material.
- A high-quality airstone produces small bubbles to ensure good ozone saturation in water.
Ozone output is commonly rated at mg/hour at a specific liters per minute (LPM) airflow. There are two methods to measure the ozone output: a) Chemical titration, which gives an incorrectly high rating, or b) Ozone-in-Air, which gives the most accurate rating. The SOTA Water Ozonator is rated by the second, more accurate method. It is 200+ mg/Hr @ 1.5 LPM airflow. The SOTA unit was tested using a GM Anceros Ozone-in-Air analyzer.
Water sterilization: The unit has a high enough Oxygen Reduction Potential (ORP) to meet minimum requirements for water sterilization. The SOTA Water Ozonator produces an ORP of over 1,000 mV. The minimum required is 600 mV so this unit exceeds requirements for water sterilization.
The unit has the option, with the addition of a universal adaptor, to operate from a 12 Volt DC source such as an automobile battery or appropriate solar panel.
Accessories Included:
- One (1) Airstone with Silicone Tubing
- One (1) Product Manual
- One (1) Wall Adaptor
The opinions stated are the views of Triangle Healing Products and do not represent the opinion of SOTA Instruments. The SOTA units are classified as Consumer Products designed to be used as part of a Wellness Lifestyle. The SOTA units are not medical devices nor are they intended to diagnose, treat or cure any medical or health condition. The use, safety or effectiveness of the SOTA units, has not been approved by any government agency. Please consult a health practitioner for any medical or health condition. Results are not typical.